We believe in providing high quality aluminium windows & doors

Mon-Fri 8am-5pm | Sat 8am-1pm

Aluminium casement windows shown open
6 min read

Can You Add Double Glazing to Existing Timber Windows? | Newage

In most cases you cannot simply swap the single pane in a timber window for a double glazed unit, because the sashes were built for thin glass and do not have the depth to hold a thicker sealed unit. Some timber frames can be modified or fitted with a second layer of glass, but for many Sydney homes the more reliable path is a new made to measure double glazed window that is designed for the glass from the start.

Looking to buy? See our double glazed windows, made to measure in our Smeaton Grange workshop and installed by our own team across Sydney.
Quick answer: Double glazed units are much thicker and heavier than the single panes in old timber sashes, so a straight swap rarely works without rebuilding the sash. Newage does not reglaze existing frames; we replace them with new double glazed aluminium windows built in our own workshop and installed by our own team.

Why can’t you just put double glazed glass into a timber frame?

Because a double glazed unit is two panes of glass with a sealed air gap between them, it is several times thicker than the glass your timber sashes were made to hold. The groove that holds the glass, called the rebate, is usually too shallow to take the extra thickness.

Even when a unit can be squeezed in, other problems follow. The extra weight puts strain on hinges, sash cords and the corner joints of an older sash. Timber moves with the seasons as it takes on and loses moisture, and that movement can stress the edge seal of the glass unit over time. Once that seal fails, moisture gets into the gap and the glass fogs from the inside, which cannot be wiped away.

There is also the question of what you are keeping. If the timber is already showing rot, flaking paint or gaps around the sash, putting expensive glass into it does not fix the draughts that come from the frame itself. Glass is only part of how a window performs; the seals, the fit of the sash and the frame all matter too.

What are the options if you want to keep your timber windows?

If keeping the timber is important to you, the usual options are rebuilding the sashes with deeper rebates or adding secondary glazing on the inside. Both are specialist joinery work, and neither is a service Newage provides.

Rebuilding sashes means a joiner remakes or modifies each moving part of the window so it can carry a thicker unit. It keeps the look of the original frame, but it relies on the outer frame being sound.

Secondary glazing adds a separate pane, usually in its own slim frame, on the room side of the existing window. It can help with noise and heat loss, though it adds a second layer to open and clean, and it does nothing for a frame that is already failing.

For homeowners who are open to a change of material, replacing the whole unit with a new double glazed aluminium window removes these compromises. The frame, sash, seals and glass are all designed to work together, and nothing old is left behind to let air in.

How do the options compare?

The right choice depends mostly on the condition of your timber and how much you value keeping it. This table sets out the main differences.

OptionWhat it involvesFrame condition neededOffered by Newage
Double glazed units fitted into existing timber sashesSashes modified or rebuilt to take thicker glassSound timber with no rotNo
Secondary glazingAn extra pane added on the inside of the windowExisting window still working wellNo
New double glazed aluminium windowOld window removed and a new made to measure unit installedAny condition, as the whole window is replacedYes

When does replacing the whole window make more sense?

Replacement usually makes more sense when the timber is rotting, the sashes stick or rattle, or you are planning to upgrade several windows at once. In those situations you would be spending money on glass while the frame keeps letting you down.

A new window gives you fresh seals, new hardware and glass that is sized and set into a frame built for it. You can also change the style while you are at it. A tired timber casement can become an aluminium awning window that stays open in light rain, or you can keep a traditional look with a double hung design. Aluminium does not swell, rot or need repainting, so the window should keep closing properly year after year.

If you are weighing up the whole house, our range of residential windows shows the styles we make, and most of them can be ordered with double glazing.

How much do new double glazed windows cost?

As a published guide, double glazed windows from Newage start from around $750 per window supplied and installed. The final figure for your home depends on the size and style of each window, the glass you choose and how easy the openings are to access.

Larger windows, opening sashes and specialty glass all add to the cost, while a group of similar windows on one job can help keep things efficient. The only way to get a firm number is a measure of the actual openings, which is why we give a free on site measure and a written quote before any work is booked.

What should you check before deciding?

A short walk around the house will tell you a lot about whether your timber frames are worth keeping. Work through these checks before you call anyone.

  1. Press a screwdriver gently into the bottom rail and sill of each window. Soft or crumbling timber is a sign of rot.
  2. Open and close every sash. Note any that stick, rattle or will not lock properly.
  3. On a windy day, hold your hand near the edges of each closed window to feel for draughts.
  4. Look for flaking paint, cracked putty and gaps where the frame meets the wall.
  5. Find out whether your home is in a heritage area, as that may affect what can be changed on the street facing side.
  6. Decide which rooms matter most for noise or temperature, so you can plan the upgrade in order of priority.

If most of your windows fail two or more of these checks, replacing them is likely to give you a better result than trying to fit new glass into old timber.

Will new aluminium windows suit an older home?

Yes, new aluminium windows can be made to suit older homes, with frame colours and styles chosen to sit comfortably with the existing look. Many owners choose a powder coat colour that matches their trims or roof, and a style such as double hung that echoes the original windows.

If your home is heritage listed or in a conservation area, check with your local council before changing windows that face the street. The NSW Planning Portal is a good starting point for understanding approval pathways in your area.

Every window we make is built to measure in our workshop at Smeaton Grange, so the new frame is sized to your existing opening rather than forced into a standard size. Our own installers fit each one, which keeps the finish around the frame neat inside and out. You can read more about how we work on our about us page. Newage has been making and installing windows and doors since 2009, with more than 2,500 projects completed and a 4.7 star rating on Google.

Get a free measure and quote

If your timber windows are draughty, noisy or starting to rot, the simplest fix is often a set of new double glazed windows built for the job. Newage makes every window to measure in our own workshop at Unit 2/16 Blackmore Rd, Smeaton Grange NSW 2567, and our own team installs them across Sydney and surrounding regions.

Have a look at our double glazed window range, then book your free on site measure and written quote or call us on 0408 585 846. We are open Monday to Friday 8am to 5pm and Saturday 8am to 1pm.

Free on site measure

Planning new windows or doors like these?

Newage measures every opening, explains your options and gives you a written quote. Made to measure in our Smeaton Grange workshop and installed by our own team.

Mon to Fri 8am to 5pm | Sat 8am to 1pm
Apartment sliding door opening to a balcony with a glass balustrade in Campbelltown

How sliding and stacking doors compare across a 4 to 5 metre opening, and which one suits your home and budget.

Read More »
Double glazed windows Sydney home fitted by Newage

Window size, frame style, glass type and site access are the main things that set the price of double glazed windows in Sydney.

Read More »
Heavy duty security screen door on a commercial rear entry in Smeaton Grange

A practical order for screening the doors on a larger Silverdale block, from the rear slider to the side door, with advice on mesh for homes near the bush.

Read More »
Open white aluminium awning window on a rendered wall

Dark, pale or dual colour frames for a new estate home in Varroville, and how to match them to brick, roof and the western sun.

Read More »
Aluminium casement windows shown open

Silverdale afternoons are hard on west facing glass. Here is how double glazing, the right coating and a thermally improved frame keep rooms cooler.

Read More »
sliding door

How to place a sliding door on a compact Austral block: which wall, how wide, how to keep privacy from the neighbour and when a certifier needs to sign off.

Read More »
Main Form

Request a Free Estimate

Looking for new windows, doors or security screens?